Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - SysEng

Pages: [1]
1
While researching air management systems for my original question above. I came across the following webinar this Thursday (Jul. 22) and thought I'd share it with the group…

"Using Simulation to Solve Advanced Air Management / ECS Design Challenges"
https://flowmaster.webex.com/flowmaster/k2/j.php?ED=147044037&UID=1183728722&RT=MiM3&FM=1

2
While researching air management systems for my original question above. I came across the following webinar this Thursday (Jul. 22) and thought I'd share it with the group…

"Using Simulation to Solve Advanced Air Management / ECS Design Challenges"
https://flowmaster.webex.com/flowmaster/k2/j.php?ED=147044037&UID=1183728722&RT=MiM3&FM=1

3
I am trying to find out what methods and tools are commonly-used for modeling and flow-balancing ECS on passenger aircraft…

Any thoughts would be appreciated. Thanks!

4
I am trying to find out what methods and tools are commonly-used for modeling and flow-balancing ECS on passenger aircraft…

Any thoughts would be appreciated. Thanks!

5
After doing a little research, I actually came across a webinar that will apparently cover these topics - looks like it's part 3 of a larger series. Here's the address, as it looks like it's open to the public:

http://www.flowmaster.com/webinars/piping_process_series_2010.html?utm_source=LinkedIn_PE&utm_medium=email&utm_campaign=FMUSA_P&P%20_Part3_Webinar_Q310

6
After doing a little research, I actually came across a webinar that will apparently cover these topics - looks like it's part 3 of a larger series. Here's the address, as it looks like it's open to the public:

http://www.flowmaster.com/webinars/piping_process_series_2010.html?utm_source=LinkedIn_OE&utm_medium=email&utm_campaign=FMUSA_P&P%20_Part3_Webinar_Q310

7
Oil Engineering / Re: Subsea Production Choke Modeling in OLGA
« on: July 13, 2010, 11:27:26 PM »
Not sure if this will help, but there is a webinar later this week on pipeline modeling and transient analysis. Maybe it would help:

http://www.flowmaster.com/webinars/piping_process_series_2010.html?utm_source=LinkedIn_OE&utm_medium=email&utm_campaign=FMUSA_P&P%20_Part3_Webinar_Q310

8
How are you predicting the effects of emergency shut-down scenarios on your pipeline networks?

I'm seeking some input on the tools you use to predict mechanical effects (hammering, etc.) from critical scenarios such as emergency shut-down.

9
How are you predicting the effects of emergency shut-down scenarios on your pipeline networks?

I'm seeking some input on the tools you use to predict mechanical effects (hammering, etc.) from critical scenarios such as emergency shut-down...

10
After doing some additional research for my potential article on UAV fluid system design over the past few days, I came across this related webinar. It looks pertinent, but I was wondering you technical experts might think about it:

“Solving UAV Fuel and Avionics Cooling System Challenges”http://www.flowmaster.com/landingpages/fmusa_q110_modeling_uav_systems.html?utm_source=Engforum_thermodynXXXX&utm_medium= weblink&utm_campaign= FMUSA_Aerospace_UAV_Webinar_Q210

11
After doing some additional research for my potential article on UAV fluid system design over the past few days, I came across this related webinar. It looks pertinent, but I was wondering you technical experts might think about it:

“Solving UAV Fuel and Avionics Cooling System Challenges”
http://www.flowmaster.com/landingpages/fmusa_q110_modeling_uav_systems.html?utm_source=engineerforum_fluidmech&utm_medium= weblink&utm_campaign= FMUSA_Aerospace_UAV_Webinar_Q210

12
Trying to get some background for a potential news article about engineering challenges for aircraft fluid (primarily fuel and avionics cooling) systems – focusing on contrasts between designing for UAVs vs. manned aircraft.

Engineers I already talked with have mentioned: designing effective avionics cooling systems within a smaller footprint and designing for more demanding mission profiles.

Are these two challenges typical for UAV vs. manned aircraft fluid system design? Does anyone have other suggested design challenges that would be of interest?

Just trying to make sure my article addresses relevant engineering topics before I invest time researching them. Any insights / suggestions would be appreciated. Thanks!

13
Trying to get some background for a potential news article about engineering challenges for aircraft fluid (primarily fuel and avionics cooling) systems – focusing on contrasts between designing for UAVs vs. manned aircraft.

Engineers I already talked with have mentioned: designing effective avionics cooling systems within a smaller footprint and designing for more demanding mission profiles.

Are these two challenges typical for UAV vs. manned aircraft fluid system design? Does anyone have other suggested design challenges that would be of interest?

Just trying to make sure my article addresses relevant engineering topics before I invest time researching them. Any insights / suggestions would be appreciated. Thanks!

Pages: [1]